98w
Showing all 2 results
-
DIY Subfloor Kit 5 – VKM 150mm for area up to 120m3
This DIY Sub floor ventilation kit is designed to ventilate a sub floor space of up to 120m3.
This kit includes the following components:1x VKM 150mm Inline fan – Click here for full fan specs
1x 6m of 150mm duct – this can be easily cut to suit your system. If more duct is required please see ‘accessories’ below.
1x External Vent
1x Intake Vent
1x 24hour Timer (The timer is plugged into a standard power point)
1x Flex & Plug (The fan is then plugged into the timer). Flex & plug is wired to high speed. Customers purchasing additional speed controller accessory are advised that the lead and plug will need to be removed so the fan can be hard wired to the switch.
1x Roll of Hanging Tape
1x Roll of Duct Tape
These components were selected because they are suitable for DIY installation. Using this kit in conjunction with accessories which need hardwiring will require installation by an electrician.
SKU: EUFUK3B -
DIY Subfloor Kit 6 – VKM 150mm with two intakes 120m3
This DIY Sub floor ventilation kit is designed to ventilate a sub floor space of up to 120m3 and comes with two intake points.
This kit includes the following components:1x VKM 150mm Inline fan – Click here for full fan specs
2x 6m of 150mm duct – this can be easily cut to suit your system. If more duct is required please see ‘accessories’ below.
1x External Vent
2x Intake Vent
1x BTO 150 x 150 x 150
1x 24hour Timer (The timer is plugged into a standard power point)
1x Flex & Plug (The fan is then plugged into the timer). Flex & plug is wired to high speed. Customers purchasing additional speed controller accessory are advised that the lead and plug will need to be removed so the fan can be hard wired to the switch.
1x Roll of Hanging Tape
1x Roll of Duct TapeThese components were selected because they are suitable for DIY installation. Using this kit in conjunction with accessories which need hardwiring will require installation by an electrician.
SKU: EUFUK3BTOB
